- 1 x S-I HID - Bulb, 24W / 10w
- 1 x S-I Bezel-Reflector assembly
- 1 x S-I Ballast
- 1 x LRB-368 DL (Li-ion battery pack /Digital LED)
- 1 x CH – 1210PS AC Charger
- 1 x Soft bag
- 1 x Belt with hook
Optional:
- DH1210 Standard DC Charger (10-15V 1.0A)
- DH1210 PS DC Charger (10V-24V 2.5A)
DC charger as power supply:
With DC charger as power supply connecting to the vehicle,
the HID lamp can continuously work and the battery-pack is on the “slow-charging” state.
- S1 red filter
- S1 IR filterr
- HID headlight with 2 stages brightness: 24W 1800 lumens->10W 550 lumens)
Digital LED tail-cap (4 stage:candle function->battery pack capacity meter-> stand by -> SOS)
- HID flashlight attached with lanyard (easily carry around, also you can put it in your duty bag or holster).
- Rechargeable HID tactical flashlight with adjustable beam (optimal beam as searchlight or spotlight).
- High intensity beam with regulated output rating
- Built-in Rechargeable LRB-368 Li-ion battery Pack, unique multifunctional tail cap with digital LED and direct recharging jack.
Digital LED Tail cap Operation:
1. The preset initial status of 12 x LED is candle function stage. Screw back off the tailcap a little bit, 12 x LED will be turned off.Screw the tailcap on to activate the lights again, will allows alternation of brightness / functions according to the sequence of
“candle function-> battery pack capacity meter-> stand by -> SOS”
and the whole sequence recurs in cycles.
2. After switched off the12 x LED for 2 seconds, the default settings resume, and the lamp will enter candle function when being switched on again.
3. 12 x LED can work as battery pack capacity meter when on “battery pack capacity meter stage”:
- 12 x LED shines, capacity 75% - 100%;
- 10 x LED shines, capacity 50% - 75%;
- 8 x LED shines, capacity 25% - 50%;
- 6 x LED shines, showing the capacity is low, the Li-ion battery pack needs to be re-charged to drive the HID lamp.
-Model: K1850
-Power:12V, 24W / 12V,10W
-Colour temperature: 6000-7000K
-Beam divergence adjustable: 4 °- 16°
-Runtime and Brightness:
1800 lumens / 60 minutes (24W stage)
550 lumens / 130 minutes (10W stage)
-Lens: tempered glass
-Switch: rotary on/off switch to prevent accidental turn on and mechanical switch failure
-Body: Aircraft grade aluminium, hard anodized
-Housing diameter: 46.6mm
-Bezel diameter: 76.6mm
-Length: 252mm
-Weight: 760g approximately
-Water resistant: splash proof
-Operation temperature: -15° C- +65° C
-Color: Tactical black
-Accessories options: red/IR Filters; spare bulb and Li-ion battery pack
-Package: soft bag and gift box