leftnew
leftnew
leftlogo
topimagegb
image1
image1
image1
Sea Lion
4 in 1 LED Emitter Flashlight with the brightness up to 700 lumens
acc
4 in 1 chip
acc
Slip-resistant grip
acc
lanyard attached
Components

Standard components:
- 1 x D39-4in1 Digital Concealed 2 modes LED-lamp assembly 6V-12V
- 1 x Super 4in1 sea lion Bezel / body
- 2 x LRB-168A li-ion battery 2400mAH
- 1 x CH-02 AC charger
- 1 x sea lion tactical button switch tailcap
- 1 x Sea lion waterproof tailcap
- 1 x gift box

Optional:
- DH-02 DC Charger


Specifications

- Features 4 in 1 LED Emitter
- Up to 700 lumens of brightness when powered by 2 x LRB168A battery
- Digital Concealed 2 modes function:
  *Default mode: Maximum brightness (100%) -> 30% brightness ->lowest brightness (2%)
  *Concealed mode: Strobe -> SOS-> Beacon signal
- Aerospace-grade Aluminum body, HA III Military grade hard anodized in black - Metal ring   can be attached with lanyard (easily carry around)
- Slip-resistant grip ideal for wet and cold weather use
- Waterproof: IPX-8 ( It can use in the 100 meters depth fresh water when with water proof   tailcap)

Specifications
Brightness:700Lumens (full brightness stage)
Runtime: full brightness stage:100 minutes with regulated output
Body:Aerospace grade aluminum construction.
Reflector:High temperature processed, layers of alloy coating films.
Finish: Low temperature (-20℃) hard - anodized (HA) finish treatment.
Lamp: 4 in 1 LED Lamp Assembly 6.0-12V
Switch: Rapid switch between Morse-on and lock-on with over 50,000 times life cycle.
Water proof: IPX-8.
Beam: flood beam with good combination of throw
Weight without battery: 245g
Length: 234mm
Body diameter: 25.4mm
Head diameter: 45mm
Operation Temperature: -25℃-60℃
Color: Tactical black
Package: gift box

Digital LED instruction:
- Soft press till the light comes on 100%, then prompt pressing the switch will activate   default mode functions, according to the sequence of “maximum brightness (100%   brightness) -> 30% brightness -> 2% brightness”.
- When switch on/off for 7 times in Default mode, the light will turn into concealed mode,   according to the sequence of “Strobe -> SOS-> Beacon signal”.
- After switched off the flashlight for 5 seconds, the default settings resume, and the lamp   will enter full brightness when being switched on again.