Digital circuit function Instructions:
1. The preset initial status of the lamp is maximum brightness(100% brightness).
2.
Press the switch at the tail cap allows alternation of brightness / functions according to the sequence of “ maximun brightness (100% brightness) -> 20% brightness -> lowest brightness(2% brightness) ->strobe ” ; and the whole sequence recurs in cycles.
3. After switched off the flashlight for 2 seconds, the default settings resume, and the lamp will enter full brightness when being switched on again.
Note:
Special sequence for your option:
Maximum brightness ( 100% ) – Strobe (10Hz) - 20%brightness –Lowestbrightness ( 2% )
High - Low
Low - High
High - Strobe etc.
3.7v-6.0v
Digital Cree P4/Q2/Q5 D26 LED lamp assembly (3.7v-6.0v)
Specification:
Brightness:
Cree P4:
130 lumens(full brightness)
Cree Q2:
150 lumens(full brightness)
Cree Q5:
185 lumens(full brightness)
Runtime:
-----------------------------------------------
with 1 X LRB 168A Rechargeable batteries:
full brightness stage: 3 hours with regulated output ;30 minutes with unregulated output.
20% brightness stage:the runtime is more than 15 hours
2% brightness stage: the runtime is more than 150 hours
blinking stage: 6 hours with regulated output;more than 30 minutes with unregulated output
-----------------------------------------------
with 2 X CR 123A Rechargeable batteries:
full brightness stage: 130 minutes with regulated output ;5 hours with unregulated output.
20% brightness stage: the runtime is more than 650 minutes
2% brightness stage: the runtime is more than 6500 minutes
blinking stage: 260 minutes with regulated output;about 8 hours with unregulated output
3.7v-6.0v
Brightness:
Cree P4 HO: 170 lumens(full brightness)
Cree Q2 HO: 190 lumens(full brightness)
Cree Q5 HO: 260 lumens(full brightness)
Runtime:
-----------------------------------------------
with 1 X LRB 168A Rechargeable batteries:
full brightness stage: 110 minutes with regulated output ;30 minutes with unregulated output.
20% brightness stage: more than 550 minutes
2% brightness stage: more than 5500 minutes
blinking stage: 220 minutes with regulated output;more than 30 minutes with unregulated output
-----------------------------------------------
with 2 X CR 123A Rechargeable batteries:
full brightness stage:80 minutes with regulated output ; 4 hours with unregulated output.
20% brightness stage:the runtime is more than 400 minutes
2% brightness stage:the runtime is more than 4000 minutes
blinking stage:160 minutes with regulated output;about 8 hours with unregulated output